Installation

1. Connect the antenna to the gateway.
2. Connect the gateway to the internet using either:
   1. The network cable by plugging it into the gateway and then an active ethernet port or cellular modem.
   2. A password protected Wi-Fi network by configuring the gateway using this guide for instructions.
3. Connect power to the gateway. The power indicator will change to green while the device is powering up.
4. After a few moments the power indicator will change to red and all other status indicators should be green. Your gateway is now ready for use.

Reset

In the event your device is offline or you need to reset it, please follow these steps.

1. Disconnect power from the gateway and then wait several seconds.
2. Reconnect power to the gateway. The power indicator will change to green while the device is powering up.
3. After a few moments the power indicator will change to red and all other status indicators should be green. Your gateway is now ready for use.